EZ Odor Control

Directions for Use

Shake before use. Product is highly concentrated and can be diluted at any ratio up to 1:19. Odor treatments are highly unique to each odor source and system. Try several dosing concentrations and/or application methods until odor control is achieved at the lowest concentration.

Drain Lines and Down Pipes:

Add 4 oz. of EZ Odor Control per 2 inches of pipe size by pouring directly into the drain pipe, starting on the lowest floor and working up at a rate of one floor each day. Repeat 2 to 4 times weekly depending on drain usage and severity of odor.

Grease Traps

• Week One - 2 gallons per 500-gallon capacity
• Week Two - 1 gallon per 500-gallon capacity
• Maintenance - 0.5 to 1 gallon per week per 1000-gallon capacity.

NOTE: Systems with heavy grease loading should be dosed at 1.5X the above rates until the buildup is under control. Start with a 1:19 dilution and increase concentration until the odor issues are resolved.

Sludge/Solid Waste/Wastewater

Using a dilution of 1:5, 1:10, or 1:19 depending on the odor source and severity, the product can be sprayed either automatically or manually directly on to the odor source once or twice a day.

For treatment of stagnated or anaerobic waste streams, the product can be metered into the system at a dosage rate of 10-20 ppm or poured into the waste stream once or twice per day manually.

Soiled Fabrics/Carpets

Using a solution of 1:19, spray the affected area and allow to dry. Repeat treatment if necessary.
Color test all fabrics before application.

Note: Dosing rates are dependent on temperature, pH, and content of the wastewater. The above applications and dosing rates may vary. For problematic systems, please contact your EnviroZyme technical representative.